How To Replace Manual Window Regulator Chevy Colorado

How to Supervene upon a Transmission Window Regulator

by Jim Dark-green

dew on car image by Vita Vanaga from Fotolia.com

When you lot turn a crank arm to raise or lower a manual window in a vehicle, a component known as a regulator, located on the within of the door panel, really makes the glass go upwards or down. Over time, or every bit the consequence of damage to the door panel, a transmission window regulator tin can finish working. Fortunately, changing a transmission window regulator is 1 of the easier do-it-yourself fixes in the earth of motorcar repair, and y'all can save money by replacing it yourself.

Stride 1

Disconnect the vehicle's battery. Even though the window regulator is manual, the within of the door console volition take wires running through, and you must ensure no ability runs through information technology while yous perform the repairs.

Step 2

Remove the vehicle'due south interior door console. On most cars, you lot will perform this step by loosening the door handle mountain screw with the advisable screwdriver while turning the handle crank spiral that holds the window in place. Ever refer to your vehicle'south owner's manual just to be on the safe side, nonetheless. Finally, remove any bolts or rivets securing the door panel in place using a socket wrench.

Stride 3

Remove the glass retainer bolts -- for most vehicles, by turning the bolts counterclockwise. At this betoken, the drinking glass pane volition be loose, allowing you lot to pull it up and take it out of the door panel. Be careful not to chip, scratch or impairment the glass when you lot set it down.

Stride 4

Locate the manual window regulator, and remove it past loosening the mountain bolts with a socket wrench.

Stride 5

Replace the damaged window regulator with a new one.

Step 6

Reposition the glass pane in its original position so it aligns correctly with your new window regulator. Place it in the same position information technology was in when you took it out in Step iii.

Press the door panel dorsum into place past realigning information technology with its rivets. Tighten all remaining screws and bolts to secure the door panel.

References

Things You'll Need

• Screwdriver with appropriate head
• Socket set
• Vehicle owner's manual

Writer Bio

Jim Greenish has been a professional freelance writer and re-create editor for over six years. He holds a B.A. in English from the University of Guelph (Guelph, Ontario, Canada) and a K.F.A. in creative writing from the University of Southern California. Green has special expertise in the areas of wellness, recreation, travel, abode and garden, and personal finance.

More Articles

Source: https://itstillruns.com/replace-manual-window-regulator-7835740.html

Posted by: princeaftek1997.blogspot.com

Share this post